Contents
Safety precautions
Preparation
2
3
3
3
4
6
6
7
COLOUR TELEVISION
......
1 Confirm which remote control you have
INSTRUCTIONS
...................................
2 Inserting the batteries
...
3
Connecting the aerial and external devices
Thank you for buying this JVC
colour television.
........................
4 Connecting the power cord
..............................................
5 SETUP TOUR
To make sure you understand how to
use your new TV, please read this
manual thoroughly before you begin.
Basic operation
Remote control buttons and functions 8
.................................
PICTURE MODE button
COLOUR SYSTEM button
SOUND SYSTEM button
8
8
8
8
9
9
9
9
9
10
10
11
11
12
12
12
12
13
13
13
14
15
15
16
18
19
.............................
...............................
........................................................
I/II button
AV-14F116
AV-21B116
AV-21C116
AV-21D116
AV-21V116
.............................................
DISPLAY button
RETURN + button
CHANNEL SCAN button
..........................................
................................
.............................................
MUTING button
.........................................
OFF TIMER button
Using the TV’s menus
............................................
Basic operation
.....................................................
ON TIMER
...........................................................
INPUT
...............................................................
VNR
..........................................
AUTO SHUTOFF
.................................................
..................................................
CHILD LOCK
BLUE BACK
SETUP TOUR
...............................................
..................................................
LANGUAGE
.......................................
AUTO CH PRESET
MANUAL CH PRESET
..................................
..............................................................
SKIP
....................................
Picture Adjustments
Using the buttons on the TV
Troubleshooting
Specifications
GGT0111-001A-H
0306-NIC-JMT
© 2006 Victor Company of Japan, Limited
Preparation
1 Confirm which remote control you have
RM-C1121
2 Inserting the batteries
Correctly insert two batteries, observing the ,
and . polarities and inserting the . end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work properly, fit new
batteries.
The supplied batteries are for testing, not regular use.
3
Preparation
3 Connecting the aerial and external devices
• For further details, refer to the manuals provided with the devices you are connecting.
• Connecting cables are not supplied.
• The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either jack
is output through both. You cannot provide input to both the front and rear jacks at the same
time. Disconnect one input, or use one of the jacks as an output jack only (for monitoring or
recording).
■ Connecting the aerial and VCR
Connecting the aerial
• Illustration of AV-14F116
* AV-14F116 only.
Connecting the aerial and VCR
VHF/UHF outdoor aerial
2
VIDEO
AUDIO
IN
OUT
3
To video
output
To audio
output
To RF
output
1
VCR
To aerial input
• Illustration of AV-14F116.
4
Preparation
■ Connecting other external devices
To audio
output
To video
output
VIDEO
AUDIO
VCR (for playing)
IN
OUT
VCR (for recording)
To audio
input
To video
input
• Illustration of AV-14F116.
Camcorder
or
TV game
To video
output
To audio
output
VIDEO IN AUDIO
MENU
CHANNEL
• Illustration of AV-14F116.
Headphones
• Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the
headphones, the TV speakers go off.
5
Preparation
4 Connecting the power cord
Connect the power cord to the AC outlet.
Operate only from the power source indicated on the rear of the TV.
5 SETUP TOUR
When the TV is first turned on it enters the SETUP TOUR mode, and the JVC logo is
displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR.
•In case of resetting that the reason for such as removal, you can set the SETUP TOUR
function on the “MENU 3” menu. For details, see page 13.
1 Press the Main power button
• Illustration of AV-14F116
on the TV.
The POWER lamp or POWER/ON
TIMER lamp lights. After the JVC
ON TIMER POWER
logo has been displayed, the TV
automatically switches to the
language setting mode.
POWER lamp Main power button
DISPLAY
button
2 Press the MENU M buttons to
MENU
/
MENU
-/+
select the on-screen language.
buttons
buttons
3 Press the MENU y button.
The AUTO PROGRAMMING function
will start and the indicator blinks.
• To stop the AUTO PROGRAMMING function, press the MENU m buttons.
When you press stop, it will display “SETUP TOUR THANK YOU!”.
When all the TV channels that can be received on your TV have been preset, the
display goes out and the AUTO PROGRAMMING function operation is completed.
• If a TV channel you want to view is not set to the channel, set it with the MANUAL CH
6
PRESET function. For details, see page 14.
Basic operation
1 Press the POWER button to turn
your TV on.
• If your TV does not turn on, press the
Main power button on the TV then press
the POWER button again.
• You can also turn on your TV by pressing
any of the following buttons;
- the CHANNEL m button
- the Number buttons
- the TV/VIDEO button
2 Select a channel.
■ Press the CHANNEL m button.
• Up/down selection cannot be selected
for channels to which the SKIP has been
set to “YES”. See page 15.
■ Press the Number buttons to enter
the channel number.
• If you want to enter a two-digit number,
press the -/-- button to select the two
digit mode “--”, then enter the channel
number.
3 Press the VOLUME M button to
adjust the sound.
4 To turn your TV off, press the
POWER button.
• We recommend that you press the Main
power button on the TV to turn the main
power off if you do not plan to use your
TV for a long time or if you wish to save
energy.
If the picture is not clear:
Press the COLOUR SYSTEM button to
select another colour system, see page 8.
If the sound is not clear:
Press the SOUND SYSTEM button to select
another sound system, see page 8.
Viewing Images from an External
Device:
Press the TV/VIDEO button to select the
VIDEO mode.
• You can also use the INPUT function to select
the VIDEO mode. For details, refer to page 11.
7
Remote control buttons and functions
In VIDEO mode:
PICTURE MODE button
You can select one of three picture
adjustment settings as you like.
SECAM
NTSC3.58
AUTO
PAL
NTSC4.43
Press this button to select a mode.
AUTO:
Automatic colour system selection.
BRIGHT:
Heightens contrast and sharpness.
• If the picture is not normal in the AUTO
mode, change the AUTO mode to another
colour system.
STANDARD:
Standardizes picture adjustments.
SOUND SYSTEM button
SOFT:
Softens contrast and sharpness.
If the sound is not clear even when the
picture appears normal, change the
current sound system to another sound
system.
• Pressing this button returns all the picture
settings in the “MENU 4” to their default
settings.
Press this button to select the sound
system.
COLOUR SYSTEM button
If the picture is not clear or no colour
appears, change the current colour system
to another colour system.
B/G
I
D/K
• You cannot select any sound system when in
a VIDEO mode.
Press this button to select the colour
system.
I/II button
You can select one of the two bilingual sounds
in an A2 stereo programme’s bilingual
programme. Press the A2 Bilingual button to
select a bilingual sound.
In TV mode (channel 1 to 99 and AV):
SECAM
AUTO
PAL
I
: Bilingual I sound
II : Bilingual II sound
• The A2 Bilingual function has no effect on
stereo programmes of the A2 stereo broadcast
programme type, although an A2 Bilingual
function indicator will appear on the screen.
• The A2 Bilingual function has no effect on
programmes other than A2 stereo broadcast
programme type, although an A2 Bilingual
function indicator will appear on the screen.
• The A2 Bilingual function has no effect in
Video mode, although an A2 Bilingual
function indicator will appear on the screen.
8
Remote control buttons and functions
DISPLAY button
CHANNEL SCAN button
You can continuously display the current
channel number or VIDEO mode on the
screen.
You can quickly view all TV channels
programmes that you can view on your
TV, and search for the programme you
want to view.
Press this button.
To turn the display off, press this button
again.
1 Press this button to start scanning
TV channels.
The TV channel programmes are each
displayed for several seconds.
• The programmes of TV channels for which
the SKIP function is set to “YES” are not
displayed. (See page 15.)
• When selecting a channel or VIDEO mode
with no input signal, indication of selected
channel or VIDEO mode becomes fixed on the
screen.
RETURN + button
You can set a channel you frequently view
to the Return Channel and you can view
that channel at any time with one-touch.
2 When you find the programme you
want to view, press this button
again to stop scanning.
MUTING button
You can turn the sound off instantly.
To set the channel to the Return
Channel:
Press this button.
1 Select the channel you want to set
to the Return Channel.
To turn the sound on, press this button
again.
2 Press this button and hold until the
message “RETURN PLUS
PROGRAMMED!” appears.
OFF TIMER button
• When you turn off the TV, the Return
Channel setting is cancelled.
You can set the TV to automatically turn
off after a set time.
Press this button to select the period of
time.
To view the Return Channel:
Press this button.
• You can view two channels (current channel
and Return Channel) alternately by pressing
this button.
• You can set the period of time to a maximum
of 120 minutes in 10 minute increments.
• 1 minute before the OFF TIMER function
turns off the TV, “GOOD NIGHT!” appears.
To cancel the Return Channel setting:
Press this button and hold until the
message“RETURN PLUS CANCELLED!”
appears.
To display the remaining time, press this
button once.
To cancel the OFF TIMER function, press
this button to set the period of time to 0.
If no channel is set to the Return
Channel:
You can view the channel selected right
before the current channel by pressing
this button.
• The OFF TIMER function will not turn off the
TV’s main power.
9
Using the TV’s menus
This TV has a number of functions you can operate using the menus. To use all your TV’s
functions fully, you need to understand how to use the menus.
2 Repeatedly press the MENU T
buttons to display a desired
menu.
• If you hold down the y button, the next
menu is displayed.
• If the selected function is on the first line,
pressing the r button displays the
preceding menu.
3 Repeatedly press the MENU T
buttons to select a desired
function.
DISPLAY
button
MENU
/
MENU -/+
buttons
4 Press the MENU M buttons to
buttons
change function settings.
Example:
Changes the AUTO
SHUTOFF setting.
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
OFF
ON
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
OFF
OFF
ON
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
• With some functions, the operation
method may differ.
■ Basic operation
1 Press the MENU T buttons.
One of the 4 menus is displayed.
5 Press the DISPLAY button to turn
the display off.
MENU number
•To operate a menu using the buttons on
the front panel of the TV, refer to
“Operating menus” on page 17.
MENU
1
TV
The icon
the left indicates
the currently
on
INPUT
ON TIMER
PR 1 0:00
OFF
VNR
selected function.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
10
Using the TV’s menus
When the time set for the ON TIMER
function is reached:
ON TIMER
Your TV will automatically turn on and
tune into the channel you set after the
period of time you set.
The TV automatically turns on and the
channel set for the ON TIMER function is
displayed.
1 Press MENU T to display the
“MENU 1” menu, then select
“ON TIMER”.
• For safety reasons the TV will automatically
turn off if no operations are made within
approximately two hours after the TV is
turned on with the ON TIMER function.
MENU
1
TV
• The OFF TIMER function and AUTO
SHUTOFF function have priority over the ON
TIMER function.
INPUT
ON TIMER
PR 1 0:00
OFF
VNR
OPERATE BY VOL-+
SELECT BY
PROGRAM BY -+
EXIT BY
DISPLAY
INPUT
You can view images from VCRs or other
devices connected to your TV.
2 Press MENU M to select a channel
you want to view when the TV turns
on.
1 Press MENU T to display the
“MENU 1” menu, then select
“INPUT”.
3 Press VOLUME M to select the
period of time after which you want
to turn on the TV.
MENU
1
INPUT
TV
ON TIMER
PR 1 0:00
OFF
The ON TIMER function starts.
VNR
• Each time you press the button, the period
of time changes in 15 minute intervals (up
to 12 hours).
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
To cancel the ON TIMER function,
press the VOLUME m button to set the
period of time to “0:00”.
2 Press MENU M to select the VIDEO
mode.
While you press MENU –/+, it will
switch to TV mode and VIDEO mode
alternately.
4 Press DISPLAY to turn the display
off.
• If you turn off the TV’s main power by
pressing the Main power button, the ON
TIMER function is canceled.
• If you do not turn off the TV after starting
the ON TIMER function, the channel will
automatically switch to the channel set for
the ON TIMER function.
11
Using the TV’s menus
VNR (Video Noise Reduction)
CHILD LOCK
You can reduce the picture noise.
You can disable the front control buttons
of the TV.
When this function is set to “ON”, the TV
can be operated using only the remote
control.
Use this function to prevent children from
operating the TV without parental consent.
1 Press MENU T to display the
“MENU 1” menu, then select “VNR”.
MENU
1
INPUT
TV
ON TIMER
VNR
PR 1 0:00
ON
1 Press MENU T to display the
“MENU 2” menu, then select “CHILD
LOCK”.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU M to select “ON”.
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
ON
ON
To cancel the VNR function, select
“OFF”.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
AUTO SHUTOFF
You can set your TV to turn off if no
signals are received for about 15 minutes
or longer after the end of a broadcast.
2 Press MENU M to select “ON”.
To cancel the CHILD LOCK function,
select “OFF”.
1 Press MENU T to display the
“MENU 2” menu, then select “AUTO
SHUTOFF”.
• The CHILD LOCK function is canceled when
you turn the power off.
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
ON
ON
BLUE BACK
You can mute the sound and change the
picture into a blue screen while no signals
are received by the TV, or when the
signals are unstable.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU M to select “ON”.
1 Press MENU T to display the
“MENU 2” menu, then select “BLUE
BACK”.
To cancel the AUTO SHUTOFF function,
select “OFF”.
• The AUTO SHUTOFF function does not
turn off the TV’s main power.
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
ON
ON
• The AUTO SHUTOFF will not work for a
VIDEO mode.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU M to select “ON”.
To cancel the BLUE BACK function,
select “OFF”.
• To view a broadcast even when the
reception signal is poor, set the BLUE
BACK function to “OFF”.
• Even when the BLUE BACK function is set
12
to “OFF”, the sound may not be audible.
Using the TV’s menus
SETUP TOUR
AUTO CH PRESET
You can start the SETUP TOUR function.
You can automatically preset all TV
channels that can be received by your TV
to channels.
1 Press MENU T to display the
“MENU 3” menu, then select
“SETUP TOUR”.
1 Press MENU T to display the
“MENU 3” menu, then select “AUTO
CH PRESET”.
MENU
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
3
MENU
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
3
LANGUAGE
ENGLISH
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
LANGUAGE
ENGLISH
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU M.
JVC logo is appear and the SETUP
TOUR function will start.
For details, see page 6.
2 Press MENU M to start the AUTO
CH PRESET function.
“>>>ON SEARCH” is displayed on
the screen.
When all the TV channels that can be
received on your TV have been preset,
the display goes out and the AUTO CH
PRESET function operation is
completed.
LANGUAGE
You can select the language for the on-
screen display.
1 Press MENU T to display the
“MENU 3” menu, then select
“LANGUAGE”.
To stop the AUTO CH PRESET:
Press the MENU m buttons.
MENU
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
3
• The AUTO CH PRESET function does not
preset a TV channel to the AV channel
(channel number 0).
LANGUAGE
ENGLISH
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
• If the TV cannot preset the TV channel you
want to view, preset it manually. For details,
see “MANUAL CH PRESET” on page 14.
2 Press MENU M to select
language.
The on-screen display indications are
in the selected language.
13
Using the TV’s menus
If the picture is not clear:
MANUAL CH PRESET
You can manually preset desired TV
channels to desired channels.
Fine-tune the TV channel.
1
Press MENU t to select “FINE”.
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
1 Press MENU T to display the
“MENU 3” menu, then select
“MANUAL CH PRESET”.
NO
B/G
SELECT BY
PROGRAM BY -+
FINE
PR 3 VL
EXIT BY
BY VOL-+ DISPLAY
MENU
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
3
LANGUAGE
ENGLISH
2
Hold VOLUME m down to fine-tune
the TV channel so that the best image
is displayed on screen.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
“>” or “<” indicates that the TV is fine-
tuning the TV channel.
2 Press MENU M.
The sub-menu is displayed.
MANUAL
FINE
SKIP
If the sound is not clear:
NO
SOUND SYSTEM
EXIT
B/G
1
Press MENU t to select “SOUND
SYSTEM”.
SELECT BY
PROGRAM BY -+
PR 1 VL
EXIT BY
SEARCH BY VOL-+ DISPLAY
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
NO
B/G
• The channel number is displayed as a PR
number. For example, channel 1 will be
displayed as PR 1. However, the AV
channel will be displayed as AV.
SELECT BY
PROGRAM BY -+
CHANGE BY VOL-+ DISPLAY
PR 3 VL
EXIT BY
3 Press MENU M to select the
channel number.
2
Press VOLUME m to select the
appropriate sound system.
4 Press VOLUME M to start
searching for the TV channel.
5 Press MENU T to select
“MANUAL”.
“>>>” or “<<<” is displayed on the
screen.
When the TV finds a TV channel, the
“>>>” or “<<<” display goes out,
and the TV channel is preset to the
currently selected channel number.
6 Repeat steps 3 to 5 if you want to
preset another TV channel to a
channel.
• If the TV channel you want to preset is not
displayed, repeat step 4 until the TV finds
the TV channel you want to preset.
• To stop the MANUAL CH PRESET function,
press any button other than the VOLUME
m button.
14
Using the TV’s menus
SKIP
Picture Adjustments
You can set undesired channels to be
skipped. Channels set to be skipped
cannot be selected by the CHANNEL m
buttons nor the CHANNEL SCAN button.
You can adjust the picture as you like.
1 Press MENU T to display the
“MENU 4” menu.
MENU
4
• Channels to which TV channels have not
been preset are automatically set to be
skipped.
TINT
COLOUR
BRIGHT
CONT.
SHARP
1 Press MENU T to display the
“MENU 3” menu, then select
“MANUAL CH PRESET”.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU T to select an item
and press MENU M to adjust it.
2 Press MENU M.
The sub-menu is displayed.
TINT*
- : Reddish
- : Lighter
- : Darker
- : Lower
- : Softer
+ : Greenish
+ : Deeper
+ : Brighter
+ : Higher
+ : Sharper
COLOUR
BRIGHT
CONT.
3 Press MENU T to select “SKIP”.
MANUAL
FINE
SHARP
SKIP
NO
SOUND SYSTEM
EXIT
B/G
*TINT (tint) is displayed only when
viewing images from NTSC3.58 or
NTSC4.43 colour systems.
SELECT BY
PROGRAM BY -+
PR 3 VL
EXIT BY
YES/NO BY VOL-+ DISPLAY
4 Press MENU M to select the
channel you want to skip.
5 Press VOLUME M to select “YES”.
The channel is set to be skipped.
To cancel the SKIP function, select
“NO”.
6 Repeat steps 4 and 5 if you want to
set another channel to skip.
15
Using the buttons on the TV
The following illustrations are of only some models are shown for explanation purpose only.
You TV may not be exactly the same as illustrated.
1 MENU button
<AV-14F116>
• MENU button
2 CHANNEL m buttons
• MENU m buttons
3 VOLUME m buttons
• EXIT from MENU buttons
4 Remote control sensor
5 ON TIMER lamp
MENU
CHANNEL
VOLUME
EXIT
ON TIMER POWER
2
3
4
1
5
6
8
The light is switched on
while ON TIMER function
is operating.
6 POWER lamp
<AV-21C116>
When the Main power is
on, the light is red.
MENU
CHANNEL
VOLUME
EXIT
POWER/
ON TIMER
7 POWER/ON TIMER lamp
When the Main power is
on, the light is green.
When ON TIMER function
is on, it is red.
2
3
4
1
7
8
8 Main power button
9 Not application
<AV-21D116>
MENU
CHANNEL
VOLUME
EXIT
ON
TIMER
POWER
2
3
4
1
5
6
8
<AV-21V116>
POWER
MENU
CHANNEL
VOLUME
EXIT
ON TIMER
2
3
9
4
1
7
8
<AV-21B116>
POWER
ON TIMER
MENU
CHANNEL
VOLUME
EXIT
2
3
4
7
8
1
16
Using the buttons on the TV
Basic operation
Operating menus
• Check to make sure the CHILD LOCK
function is set to “OFF”. When the CHILD
LOCK function is set to “ON”, the TV cannot
be operated using the front control buttons.
For details, see “CHILD LOCK” on page 12.
You can operate functions in menus using
the front control buttons on the TV.
1 Press MENU y to display a menu.
2 Press MENU y repeatedly to display
1 Press CHANNEL M to turn the TV
the menu you want to use.
on from standby mode.
3 Press MENU y to select the desired
2 Press CHANNEL M to select a
function or item.
channel.
4 Press MENU M or VOLUME M to
3 Press VOLUME M to adjust the
carry out the desired operation.
volume.
For details, see the description for each
function.
4 To turn your TV off, press the Main
power button to turn off the TV’s
main power.
5 Press VOLUME M to turn the menu
display off.
To change the TV mode to the VIDEO
mode:
To turn the sub-menu display off:
• Select the VIDEO mode with the INPUT
function in “MENU 1”.
1
Press MENU y to select “EXIT”.
MANUAL
FINE
SKIP
NO
SOUND SYSTEM
EXIT
B/G
SELECT BY
PROGRAM BY -+
EXIT
PR 3 VL
EXIT BY
BY VOL-+ DISPLAY
2
Press VOLUME m to turn the display
off.
17
Troubleshooting
If there is no picture or the TV does not operate normally, make sure the problem isn’t due
to the reasons indicated below.
If the problem persists even after taking the measures indicated, please contact a service
technician.
Poor picture
Cannot turn the TV on
• Press the COLOUR SYSTEM button to select
another colour system. (see page 8.)
• Press the Main power button on the TV.
• Connect the power cord to the AC outlet.
• Adjust the picture settings. (see page 15.)
• Set the Picture mode to STANDARD.
(see page 8.)
The screen turns blue
• Is the BLUE BACK function on? (see page 12.)
• If noise (snow) totally blocks out the picture,
check the following.
- Have the TV and aerial been connected
properly?
Remote control inoperable
• Replace the batteries. (see page 3.)
- Has the aerial cable been damaged?
- Is the aerial pointing in the right direction?
- Is the aerial itself faulty?
Buttons on front of the TV do not work
• Switch the CHILD LOCK function off.
(see page 12.)
• If the TV or aerial suffer interference from
other equipment, stripes or noise may appear
in the picture. Move any equipment which
can cause interference away from the TV.
TV does not respond immediately
• If the TV or aerial suffer interference from
signals reflecting from mountains or
buildings, double-pictures (ghosting) will
occur. Change the aerial’s direction or replace
it with an aerial with better directionality.
• Press the main power button on the TV to
turn off the main power. Press the main
power button again to turn on the TV. If the
TV returns to a normal state, operation is
normal.
• When a white and bright still image (such as
a white dress) is displayed on the screen, the
white part may look as if it is coloured. When
the image disappears from the screen, the
unnatural colours will also disappear.
The TV turns off suddenly
• Is the OFF TIMER function set to operate?
(see page 9.)
• Is the AUTO SHUTOFF function on?
(see page 12.)
The TV turns on suddenly
• Is the ON TIMER function set to operate?
(see page 11.)
• Have you not performed an operation for
about two hours after the TV was switched on
by the ON TIMER function? (see page 11.) If
you don’t perform an operation within about
two hours, the TV is automatically switched
off for safety.
The TV channel changes suddenly
• Is the ON TIMER function set to operate?
(see page 11.)
Poor sound
• Press the SOUND SYSTEM button to select
another sound system. (see page 8.)
18
Specifications
AV-14F116
B/G , I , D/K
PAL, SECAM
AV-21B116
AV-21C116
AV-21D116
AV-21V116
MODEL
TV RF systems
Colour
RF MODE
systems
VIDEO MODE PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz
Channel and frequencies VHF low channel (VL) = 46.25 to 168.25 MHz
VHF high channel (VH) = 175.25 to 463.25 MHz
UHF channel (U) = 471.25 to 863.25 MHz
*Receives cable channels in mid band (X to Z, S1 to S10),
super band (S11 to S20) and hyper band (S21 to S41)
AC 220 to 240 V, 50/60 Hz (operating AC 90 to 260 V, 50/60 Hz)
Power input
Power consumption
MAX 68 W
AVG 47 W
MAX 100 W
AVG 65 W
MAX 100 W
AVG 65 W
MAX 90 W
AVG 60 W
MAX 100 W
AVG 65 W
Screen size
(measured diagonally)
Picture tube 368.4 mm
Visible area 335.4 mm
Picture tube 546.9 mm
Visible area 508 mm
Picture tube 546.9 mm
Visible area 508 mm
Picture tube 546.9 mm
Visible area 508 mm
Picture tube 546.9 mm
Visible area 508 mm
Audio output
3W
3W
3W
3W
3W
(Rated power output)
Speakers
(5 x 9) cm x 2 (5 x 9) cm x 2 (5 x 9) cm x 1
(5 x 12) cm x 2 (6.5 x 13) cm x 2
External input / output
INPUT : VIDEO input (RCA), AUDIO input (RCA)
OUTPUT : VIDEO output (RCA), AUDIO output (RCA)
Headphone jack : stereo mini jack (3.5 mm diameter, sound is monaural)
Dimension (W x H x D) (mm) 462 x 340.5 x 375 mm 598 x 476 x476.7 mm
502 x 476.5 x 471.6 mm 598 x 468 x 478 mm
649 x 465.5 x 473.5 mm
Weight
10 kg
21 kg
22 kg
21 kg
22 kg
Accessories
-
Remote control unit :
RM-C1121 x 1
-
Remote control unit :
RM-C1121 x 1
-
Remote control unit :
RM-C1121 x 1
-
Remote control unit :
RM-C1121x 1
-
Remote control unit :
RM-C1121 x 1
- AA/R6/UW-3 dry - AA/R6/UW-3 dry - AA/R6/UW-3 dry - AA/R6/UW-3 dry - AA/R6/UW-3 dry
cell battery x 2 cell battery x 2 cell battery x 2 cell battery x 2 cell battery x 2
- Matching aerial - Matching aerial - Matching aerial - Matching aerial - Matching aerial
adapter x 1
adapter x 1
adapter x 1
adapter x 1
adapter x 1
-
Rod aerial x 1
Design and specifications subject to change without notice.
19
20
|